Wednesday, January 26, 2011

http://www.youtube.com/watch?v=iZst_2xJHAI

Sounds like epic expansion to me.

Tuesday, May 4, 2010

ENDS 116 Project 3 for Daniel Kelly






Utilizing the newly introduced to us 3dsMaxDesign program, Project 3 consisted of importing our preconstructed Revit files into 3ds and creating movies out of them. One movie was to be a 'Fly Around', similar to the view of a circle airplane focused on our houses, and another movie was made to exibit the interior of one house by giving a full walkthrough.




To begin, I opened Revit and made adjustments to the layout of my design. This included altering lighting fixtures, the sun's position, deleting excess previous imports, etc, in order to make the transfer of the models from Revit to 3ds as efficient as possible. Once done with this, and the houses imported into 3ds, my next step was to create layers for each of the various materials housed in my houses so any future changes to texture, material, or rendering images would be much easier to do. After assign each material a layer, I went about moving the entire project to the origin of the grid it was laying on in 3ds, since in Revit it had been so far from there thanks to its original site being 250ft above sea level. For rendering, the lights imported from Revit were unnecessary, so by pulling up the 'select from scene' dialog I selected said lights and deleted each of them.



My original Revit files only contained a small section of topography and and even smaller scene of the lake, so for the fly around video I needed to expand both areas. Problem was, I also need the immediate topography surrounding the houses because of the change in elevation and details of the the houses as they related to their surrounding. So to solve this I ended up cloning the original topography and rescaling it by element to a much larger size. Since the lake was already at the correct height, no cloning was necessary, just scaling, so I rescaled it to match the massive new land size. When the topography had rescaled though, cast shadows of elevation changes were noticable, and, at first, I altered the image by meshing the old and new topographies and adjusting the vertices and faces of the land so as to get rid of any imperfections. However; this resulted in a bland view of what looked like two houses sitting on a crop field. So, I reverted the image back to the two sets of topography with the appreciation that the 'imperfections' actually gave life to the video as they gave an elemant of natural perspective, showing how the terrain past that immediately surrounding the houses could and would change. I went ahead and rendered the movie as with the houses on the 'crop field' as well to show you what I mean. For the video itself, an ellipse was created to circumambulate the entire model and a walkthrough camera was assigned to it. The camera was not facing the correct direction though, so I assigned it a target close to the center of the model. While draft rendering, it was apparent that the field of view for the camera was minimal, so I modified the lens until I found that the 24mm covered the entire picture very well and stuck with it. Also while rendering, I realized the sun's cast shadows where too dramatic and they needed to be toned down somewhat, so I selected the sun object and went to its imported setup and changed the exact time it was to be standing over the house until the rendered shadows depicted the houses' characteristic as best as possible. After all this was done, proper lighting, exposure, precision, and detailing qualities were selected for the final rendering and I proceeded to finish the movie.










div>






Weiling's house, chosen for the full walkthrough video, needed to have even more alterations for the rendering scenes to be as relisticly lit and portrayed as possible. The first step I followed was to create an entire path way through the house that would accurately depict the interior spaces and give the viewer a full sense of the house as a whole. The path's elevation and 'cleanliness' had to be consistantly updated so that as the camera, now assigned to the path, followed along through the house, it could refrain from running through walls and could travel up the stairs, etc. This was done by modifying the vertices along the path via elevation and position changes at key moments. Relizing the draft renderings failed to emmit enough light into the house, I had to create lights myself, since the Revit imported ones had been previously deleted. After attempting to use omni lights, and failing to create accurate lighting conditions, I switched to creating simple free lights and placing them in any lamp, light stand, or other area I deemed necessary throughout the house. Once they were all correctly elevated and positioned, I proceeded to do draft renderings of their areas and tweaking them until the lighting seemed of rendering quality. Following this, I moved to the videos animation aspect. My camera's walkthrough path never went straight through a wall, however it did have to walk through doors at numerous points. To solve this, I animated the individual door the camera was faced with so they would open as the camera approached them. This succeeded in being a more difficult task than I had anticipated. With each door, I set a key at appropriate position for the camera to see when the door begins to open, then I would proceed to change the object's pivot position to match the movements of a door swinging open. After rotating the door by the pivot point to an open position, another key would be set, and that door's opening animation would be finished. For the main door, I also created a 'closing' animation; and for the last door I created a 'blowing away' animation where to door seems to get blasted away as you approach it. This was done continually shifting the pivot, rotating the door, and setting a key, over and over 'til the animation seemed complete. Also considered in the walkthrough was the time spent in certain areas of the house. I succeeded in slowing the camera with the help of Dr. Yan by selecting the beginning and the end of the scene I would want to extend and then spreading the keys of both apart so as to slow the walking at that position. While rendering, I realized that there was not one single light/exposure setting that could work for the piece as a whole. To solve this I rendered scenes selectively with proper lighting condtions, then changed those conditions to fit the next scenes and so forth until the video was done. That about sums up the walkthrough movie.



As an after-thought, I realized one house was favored by having its own walkthrough movie, so I decided to even things out a bit. To make it more fair I gave Dr. Yan's house its own circumabulatory movie. I deleted the topography, along with the Weiling house, leaving just Yan's house, and then proceded to create a about twice as big as the house's foundation. Adjusting the elevation to make it level with the base of the house, I then assigned this plane the characteristics of the topography layer so that there would be terrain surrounding the house. Next, I created an ellipse around the building itself and assigned a camera to it, modifying the eye level and size of the ellipse so that the camera could get an accurate and consistant view of the house. Since the orignal origin of the project had been erased, I used the object closest to the center of the house as the target for the fly around camera. I changed the sun so its cast shadows would fit the video and left the lights off on the inside of the house so the viewer would maintain focus on the exterior design of the building being presented. and then i rendered it.



3ds as a whole is an...interesting program. I respect its quality for importing, creating, and animating models through itself, or through other software's help. I hold some of its detail components against it though, as I believe they could adjust some of the controls to make the program less frustrating at points in the modification process. Regardless, it gets the job done in the end and for its extensive abilities its probably as efficient as it could immediately be.

Thursday, April 8, 2010

ENDS 116 Project 2_kelly


In total: thirteen people were added the image, along with one animal, one vehicle, and one godzilla. The concentration of persons in the living space reveals this area's social importance as the main gathering area. My little brother demonstates how a kitchen dining table is properly used while my little brothers friend depict just how Dr. Yan's children will be running around outside. The balcony, stairs, upstairs, and front door all have entities which represent the proper use of their respective zones, and a 2009 Dodge Viper SRT-10 sits in the driveway. And there's a squirrel in a tree. And godzilla is attacking.

Where to begin with problems... well, for one, my laptop seemed incapable of rendering the main images of the buildings, so I was forced to use the labs downstairs. Once I began the renderings, pixilation and timing problems forced my to redraw boundaries and walls and the like until everything seemed to fit together and my final renderings began. However each rendering took over a night to do and in the morning, the flash drive attached to my computer had been stolen. awesome. Luckily one of my renderings had finished and managed not to get messed with, so i emailed it to myself. The other image had froze and was the wrong side, so i restarted it in the corner of the lab. Once I began working on the image I had emailed myself, it proved quite difficult to find decent pictures to use for the project. This stage repeated itself several times and ended up consuming a considerable amount of time. Not sure why, but my mouse decided to go nuts and even when working on a specific point on the picture, it would begin 'modifying' another section, not at all where the cursor was. This was solved through a series of reseting the mouse. Recoloring items in the image, or just editing in general proved to create its own challenge every time I attempted to do so. Thanks to third party help and extensive effort: this was overcome.



Working on this project consisted over lengthy googling for appropiate images to place strategically throughout my image. This was a surpriseingly difficult feat, however several useful images were found and used. Also browsed where some personal pictures incorporating my family and friends to help define spaces (such as the kids running, the kid at the table, etc). Each of these images were individually saved and opened in photoshop. Once opened, they were "lasso-ed" and cropped, scaled and transformed to fit the appropriate size for the image, trimmed so no excess from the original photo would spread over the main picture, and then given its own individual shadow to reflect the proper lighting conditions. Each picture was appropriately placed in order to effectively reveal the proper use of the space which the image resided in. Examples of two such images are shown above.^

Photoshop Shinanigans


Aight so this photoshop thing wasn't so bad, I almost enjoyed it even. The assignment was to take a 'picture' (section box rendering of one of my houses) and photoshop anything I deemed necessary to convey the proper use of space in my house. After extensive computing hours and multiple set-backs, you now see my final image. Don't judge harshly please, I'm a noobie.

Tuesday, March 9, 2010





Whilst creating these projects in the revit program, multiple problems made me aware of their presense. The first obstacle was creating a rounded-off rectangular gap, or hole, in the second story of the Yan house. After attempts the create and erase floor boundary after floor boundary failed, I was forced to seek guidance via google. Their I was instructed to correctly alter my originally created floor boundary and some of its qualities in order for the gap to be created, which was then done successfully. Another problem arose when I tried to create a driveway that followed the natural landscape. At first I tried to create an extensive floor plan to cover the driveways distance, however it continually stretched out under my topography levels. Eventually I switched to creating a subregion in the topography itself with an alternate material of cast-in-place concrete which ultimately lead to the correct creation of my driveway for the Weiling household. Finally, despite this not being the last of my problems encountered, but a significant one to finish with, we shall deal with my roofing dilema. All of my original roofs, once rendered, seemed to look fake, tacked on, and I continually took measures to create texture or any sense of realism for them. I failed. Until I took a very close look at the materials dialouge for my roofing material. I know that there was a certain texture and color I was using, it just was making itself present in the renderings. Eventually I found a modification box which allowed me to spread the texture out over a greater area to the ends of finally being seen via rendering.